Calibrated and supplied with a traceable calibration certificate to ISO 17025 standards, the scientific datalogger records ensures integrity of critical products. With an accuracy of up to 0.2?C / 0.36?F and a display resolution of 0.01, and water proof to IP67, these loggers provide a robust but highly accurate solution for a multitude of high accuracy applciations.
32K Non-volatile Memory The Scientific recorder has a 32K memory allows 16 hours to 2 years of recording depending on sample rate. Optional Low Temperature Range With the optional stainless steel probes, select a low temperature thermistor sensor, which will allow temperature recording down to -80?C / -112?F.
| Multiple Trip Recording Use the Scientific recorder time and time again. After each use, download your data and the recorder is ready for its next application. | |
| Long-life Lithium Battery The Scientific range of recorders have a Lithium Thionyl Chloride battery, which gives an estimated 5 year battery life and is rated to temperatures down to -40?C / -40?F. | |
| Calibrated to 0.2?C / 0.35?F Scientific recorders go through a 3-point calibration process at time of manufacturing. All scientific recorders are supplied with a traceable ISO17025 accredited calibration certificates. | |
| Four Probe Options Available Choose from four different probe options: Stainless Steel straight or bent probe, Plastic Handle probe or the Teflon probe. More Details |
LED Status Indicators The entire Temprecord recorder range has out of range indication. Set parameters and a red or green LED flash every 10 seconds will tell the user at a glance whether or not data recording has remained within the limits set. | Push Button Start / Stop | Retaining Hole Fully moulded and ultrasonically welded retaining hole for easy securing of the data logger within different environments |
This easy system allows you to start and stop your recorder anywhere without sophisticated software in the field. This feature can be enabled or disabled and then started and stopped within the Temprecord for Windows software.Specifications
| Memory | 32k non volatile |
| Sample Period | Programmable between 2 seconds and 36 hours in 2 second increments |
| Start Delay | Programmable between 2 seconds and 36 hours or use the start on date and time function |
| Start and Stop | Start / Stop button on recorder or use the software and reader interface to start and stop recorder |
| Recording Duration | 16 hours at 2 sec sample rate and 2 years with a 36 hours sample rate |
| Temperature Range Non Probe Standard Probe Low Temp Probe | -40?C / -40?F to +75?C / 167?F -50?C / -58?F to +110?C / 230?F -80?C / -112?F to +110?C / 230?F |
| Temperature Accuracy | 0.2?C ~ 0.36?F over the range -20?C / -4?F to +50?C / 122?F otherwise 0.5?C / 0.9?F |
| Inside Range Indicator | One flash from Green LED indicator every 10sec |
| Outside Range Indicator | One flash from Red LED indicator every 10sec |
| Display Resolution | 0.01?C ~ 0.01?F |
| Battery Type | Primary Lithium Thionyl Chloride |
| Dimensions & Weight | 129 x 73.5 x 14mm, 83 gms, Blue 5 1/8 x 2 7/8 x 5/8 inches, 2.92oz, Blue |
| Case Protection Rating | Water proof to IP67 (NEMA 6) |
| Warranty Period | 12 months on recorder from date of purchase ~ 2 years on battery |
If you would like more information, please "Get On TRAQuE" and contact us.
