Combined temperature and relative humidity logger, with a market leading 3% accuracy on the RH accuracy, as well as the high degree of accuracy and resolution to be expected from the Temprecord range.
Temperature and Humidity Recording
The Temprecord RH Logger records temperature and humidity data simultaneously. Via a Temprecord Reader and a computer, users can set recording periods, toggle on and off the recording of temperature and humidity data.
Long-life Lithium Battery
Use the Temprecord Logger time and time again. The unit's Lithium Thionyl Chloride battery provides a life expectancy of approximately 2 years.
32K Non-volatile EEPROM Memory
Prolonged recording and reliability is ensured with premium quality EEPROM memory. 32k of memory allows up to 32,000 samples of data.
RH Sensor Cover
A dust cover is supplied with the RH recorder for extended reliability of your RH sensors in harsh environments.
Calibrated to 0.2?C / 0.35?F & 3-4% RH
Humidity and temperature calibration certificates are issued with every Temprecord RH Logger from an ISO17025 calibration laboratory.
Set and Analyse Integrated Data
Temprecord software allows you to view both humidity and temperature recording on the one graph.
LED Status Indicators The entire Temprecord recorder range has out of range indication. Set parameters and a red or green LED flash every 10 seconds will tell the user at a glance whether or not data recording has remained within the limits set. | Push Button Start / Stop | Retaining Hole Fully moulded and ultrasonically welded retaining hole for easy securing of the data logger within different environments |
Memory size | 32k - records a total of 32000 samples per use. 16000 Temperature and 16000 Humidity recordings. |
Sample period | Programmable between 2 seconds and 36 hours in 2 second increments |
Start delay | Programmable between 2 seconds and 36 hours or use the start on date and time function |
Start and Stop | Start / Stop button on logger or use the software and reader interface to start the logger |
Recording duration (memory full) | From 16 hours with a 2 second sample period set, to 2 years with a 36 hour sample period set |
Temperature range | -40?C to +75?C ~ -40?F to +167?F |
Temperature accuracy | +/-0.2?C ~ +/-0.36?F over the range -20?C to +50?C ~ -4?F to +122?F otherwise 0.5?C / 0.9?F |
Humidity range | 0.00% to 100% RH |
Humidity sensor accuracy | 3% RH between 12 to 85% RH, otherwise 5% RH between 0.00 to 12% and 85 to 100% RH |
Inside range indicator | One flash from Green LED every ten seconds |
Outside range indicator | One flash from Red LED every ten seconds |
Display resolution | 0.01?C ~ 0.01?F |
Firmware version | v2.13 and v2.14(new hi-speed download) |
Battery type | Lithium Thionyl Chloride 3.6V |
Dimensions weight and colour | 129 x 73.5 x 14mm 83 grams ~ 5 1/8 x 2 7/8 x 5/8 inches 2.92 oz ~ Beige |
Case protection rating | Splash proof to IP56 (NEMA 4X). IP56 Protection Rating applies to the portion of the case that houses the electronics and battery, not the RH sensor itself. If the sensor has been exposed to water spray or jets of water you must dry the RH sensor using the procedure described in the Temprecord user manual to return the RH sensor back to factory calibration conditions. |
Warranty Period | 12 months on logger from date of purchase ~ 2 years on battery |
If you would like more information, please contact us to "Get On TRAQuE"
ISO 17025 Calibration |
RH |
32K Non-volatile |
32,511 samples |
Programmable between 2 second and 36 hours in 2 second increment |
10s to 36 hrs |
Start / Stop button on logger or use the software and reader interface to start the logger |
16hrs up to 2 years |
-40 ̊C to +75 ̊C (-40 ̊F to +167 ̊F) |
0.2 ̊C (0.35 ̊F) over the range -20 ̊C to +50 ̊C (-4 ̊F to +122 ̊F) else 0.5 ̊C (0.9 ̊F) |
0.01 ̊C (0.01 ̊F) |
0 - 100% |
3% RH between 12 to 85% RH, otherwise 5% RH between 0.00 to 12% and 85 to 100% RH |
One flash from Green LED Indicator every 10 seconds |
One flash from Red LED every 10 seconds |
Lithium Thionyl Chloride (3.6V) |
Grey |
Waterproof to IP67 or NEMA 6. FDA approved food grade casing |
12 months on data logger and 2 years on battery from date of purchase. Warranty void if traces of water found within logger case |
Dimension (L x W x H) | 0 x 0 x 0 |
Weight | 0 |
Our contact details in Singapore are: TRAQuE Pte. Ltd.51 Bukit Batok Crescent, #08-25 Unity Centre 658077 Singapore | |
+65 6316 3885 | |
+65 6316 3885 | |
www.traqueasia.com | |
traque-pte-ltd |
Our mailing address in Malaysia is:
TRAQuE Sdn. Bhd. Suite 13-10, Level 13, Johor Bahru City Square Office Tower, 106 - 108, Jalan Wong Ah Fook, 80000 Johor Bahru. |
If you would like further information on our products or services, then feel free to contact us using the form below. We look forward to working with you.
TRAQuE is pleased to announce we have been awarded BizSafe Star by the WSH Council.
Congratulations to the team and well done in the continued efforts in supporting safety.
We’ve always placed great importance on being close to our customers. The ability to provide local resources, respond quickly and be onsite as required has proven extremely valuable in the seven years since we began operations in Asia.
We're delighted to be kicking off our partnership with Protak Scientific in Singapore. This revolutionary alternative to biological indicators for use when assessing VHP effectiveness is significantly quicker than current methods and can provide linear quantitative data, resulting in optimised cleaning processes and increased productivity.